# Workflow

To start any of the available processing in BridgeWIZ, you should complete 3 steps:

## Initialize a source

<figure><img src="https://3554148854-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FwE5Dw5CXP63kQw6XW1le%2Fuploads%2FhFBUMN51EHo8TUvLMHwy%2Fimage.png?alt=media&#x26;token=6d6e4389-1284-41fe-848d-146a4f68aecd" alt=""><figcaption></figcaption></figure>

## Configure a destination

<figure><img src="https://3554148854-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FwE5Dw5CXP63kQw6XW1le%2Fuploads%2F7ucPhzfAIL2KvHTYggwk%2Fimage.png?alt=media&#x26;token=c59d6050-10bd-497e-9064-654922eba8a0" alt=""><figcaption></figcaption></figure>

## Start the processing

<figure><img src="https://3554148854-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FwE5Dw5CXP63kQw6XW1le%2Fuploads%2FxL7uVumxLWKQreKliUCi%2Fimage.png?alt=media&#x26;token=bd9c648f-2079-488e-9144-16e36427fb13" alt=""><figcaption></figcaption></figure>

This is actually building a "bridge" between the source and the destination. You can build multiple bridges at the same time, so you can distribute your source to NDI, SDI, network streams and local files simultaneously.